Polyvinyl Coated Products Commonly Know as PVC, PVS and PCD
|PVS Flat Sheets|
|48 x 120||26||4812026P|
|48 x 120||24||4812024P|
|48 x 120||22||4812022P|
|48 x 120||20||4812020P|
|4 mil x 4 mil available. Consult Factory|
|PVS Spray Paint|
|1 Can||12 Oz||3000|
|1 Case, Qty 12||144 Oz||3001|
|Approx coverage 4.2 sq. ft.
PVC paint is available to touch up any scratches that may have occurred during installation.
The process of PVC sheet mfg. begins with (1) prime, hot dipped G-60 galv. steel cleaned & fire treated. (2) A special epoxy primer bonded to both sides of the metal. Finally (3) a 4-mil polyvinyl coating heat fused to one side (4 x 1 Standard) or both sides (4 x 4).
By combining the strength of steel and the chemical inertness of plastic, PCD or PVS Flat sheets are corrosion and weather-resistant. PVS or PCD will not rust, chip, crack, peel, corrode or produce odors. Its practical temperature range is from -40 F to 250 F. Our Prime sheets can be used for most any job utilizing its (LFQ) lock forming qualities.
|1 Roll||2″ x 108′||3002|
|1 Case = 18 Rolls||2″ x 108′||3003|
|PVS Duct Seal|
|1 Tube||1/12 Gallon||S2TD|
|1 Pail||1 Gallon||S2D|
|1/4′ Bead @ 300′ or 2″ x 1/32″ @ 300′|
Fasten joints with metal screws or rivets at 6″ intervals with a minimum of three per joint, then sealed by tape or sealant.